4. ASSEMBLY
WARNING! Always be sure that the tool is switched off and the battery is removed before
assembling the tool.
4.1 INSTALLING OR REMOVING SAW CHAIN
WARNING! Always wear gloves when installing or removing the saw chain.
-
Loosen the screw by turning counterclockwise the knob until the sprocket cover comes off.
-
Remove the sprocket cover.
-
Remove saw chain and guide bar from the tool.
-
Fit in one end of the saw chain on the top of guide bar.
-
At this time, fit the saw chain as shown in the figure above because it rotates in the direction of
arrow.
Sprocket
cover
Guide bar
Cutter
14
Knob
Arrow