6.4
Connecting the temperature sensor/anti-condensation heater
6.4.1
Connecting optional integrated devices and equipment
In addition to the current-dependent overload protective device located in the connecting
cables, use the optionally available integrated devices and equipment, for example,
temperature sensors, anti-condensation heating.
Auxiliary circuits are connected in the terminal box.
6.5
Conductor connection
Cross-sections that can be connected depending on the size of the terminal (possibly reduced
due to size of cable entries)
1PC1423 roller-table motors SH 112 ... 400
Operating Instructions
Electrical connection
6.5 Conductor connection
65