Table of Contents
Advertisement
The ESD protective measures required for components that can be destroyed due to
electrostatic discharge are shown in the following drawings:
a = conductive floor sur‐
face
d = ESD overall
2.7
Electromagnetic compatibility
Electromagnetic compatibility
This machine is designed in accordance with IEC/EN 60034, and when used as specified it
satisfies the requirements of European Directive 2014/30/EU on Electromagnetic Compatibility.
2.8
Interference immunity
By selecting suitable signal cables and evaluation units, ensure that the interference immunity
of the machine is not diminished.
2.9
Influence on the line power supply through a strongly irregular
torque
A strongly irregular torque, for example with the drive of a reciprocating motor, forces a non-
sinusoidal motor current. The emerging harmonics can have an impermissible influence on the
line power supply via the connection lines.
1PC1423 roller-table motors SH 112 ... 400
Operating Instructions
2.9 Influence on the line power supply through a strongly irregular torque
b = ESD table
e = ESD wristband
Safety instructions
c = ESD shoes
f = cabinet ground connection
19
Advertisement
Table of Contents
