Beko BEEPG 090 User Manual page 13

1 Safety precautions
>9000Btu/h and <=12000Btu/h
units: 17m
2
>12000Btu/h and
<=18000Btu/h units: 26m
>18000Btu/h and
<=24000Btu/h units: 35m
• Reusable mechanical
connectors and flared joints
are not allowed indoors.
(EN Standard Requirements).
• Mechanical connectors used
indoors shall have a rate of
not more than 3g/year at 25%
of the maximum allowable
pressure. When mechanical
connectors are reused indoors,
sealing parts shall be renewed.
When flared joints are reused
indoors, the flare part shall be
re-fabricated. (UL Standard
Requirements)
• When mechanical connectors
are reused indoors, sealing
parts shall be renewed.
When flared joints are reused
indoors, the flare part shall be
re-fabricated. (IEC Standard
Split type air conditioner / User Manual
Requirements)
• Mechanical connectors used
indoors shall comply with
2 ISO 14903.
European disposal
2
guidelines
This marking shown on the
product or its literature, indicates
that waste electrical and eletrical
equipment should not be mixed
with general household waste.
This appliance contains
refrigerant and other potentially
hazardous materials. When
disposing of this appliance, the
law requires special collection
and treatment. Do not dispose of
this product as household waste
or unsorted municipal waste.
When disposing of this
appliance, you have the following
options:
Correct disposal
of this product
(Waste electrical
& Electronic
equipment)
13 / 200 EN