Audio Settings - D-Link DCS-6113 User Manual

Fixed dome network camera

Hide thumbs Also See for DCS-6113:

Table of Contents

Configuration

Audio Settings

Mute: Select to mute audio.

Note:

• If the switch on the Control board is switched off (disabled audio) then this

option will be disabled.

Select and set an internal microphone input gain from the drop-down list.

External microphone input: Set the microphone input gain at either 0dB or 20dB.

Note: The higher the decibel number, the louder the sound.

Audio type: Advanced Audio Coding (AAC) is a wide band audio coding algorithm

that exploits two primary coding strategies to dramatically reduce the amount of

data needed to convey high-quality digital audio. Select a higher bit rate number

for better audio quality.

AAC bit rate: Select an AAC bit rate from the drop-down list. Higher bit rate means

higher audio quality but it takes more network bandwidth to transmit.

G.711: Select between uLAW (G.711) and ALAW (G.711) compression formats. A

higher audio quality will require more bandwidth.

D-Link DCS-6112 /6113 / 6113V User Manual

Table of Contents

Dcs-6112 Dcs-6113v