Project Source W3030B Assembly Instruction Manual page 8

ASSEMBLY INSTRUCTIONS
7. Assemble the cabinets parts as per the illustration.
Using a phillips head screwdriver, rotate the minifix
cam clockwise to fasten into place. Ensure all cams
are locked into place before moving the cabinet.
8. Insert the back panel as shown in the drawing.
10. Using a phillips head screwdriver, secure the
drawer box with csk screws 1 ½" as shown in the
illustration. Be careful not to over-tighten as this
may damage the product.
Hardware Used
GG CSK screw 1 1/2"
7
8
9
x 2
8
GG