Table of Contents
Advertisement
Registration
On the base:
1. Hold down the page key on the back of the base.
2. After the button is held down for five seconds, the
amber led begins blinking amber and blue. The page key
can now be released. The base is now in registration
mode.
On the deskphone:
1. If the deskphone has not registered to any base, it will show "Unregistered" on
idle screen.
2. Press "OK" button on the deskphone to enter the main
menu.
3. Use the navigation keys to highlight the item "Settings" and then press "Select"
soft key.
4. Use up/down navigation keys to highlight the item "Registration" and then press
"Select" soft key.
5. Highlight the item "Base Registration" and press "Select" soft key
6. Select "BS 1" and press "Select" soft key. The deskphone will attempt to
register to the base.
7. Once the registration succeeds, "Deskphone X" will display on idle screen of
hand- set.
8. If registration fails, ensure that the base is still in registration mode (with the led
blinking blue and amber) and that the base and deskphone are in close proximity,
then try again.
Advertisement
Table of Contents
