Screen Menu - Hitachi CP-A200J User Manual

SCREEN menu

SCREEN menu
From the SCREEN menu, items shown in the table below
can be performed.
Select an item using the ▲/▼ cursor buttons, and press
the ► cursor button or ENTER button to execute the item.
Then perform it according to the following table.
Item
LANGUAGE
MENU POSITION
BLANK
START UP
40
(continued on next page)
Using the ▲/▼ buttons switches the OSD (On Screen Display) language.
ENGLISH FRANÇAIS
...
(shown in the LANGUAGE dialog)
Using the ▲/▼/◄/► buttons adjusts the menu position.
To quit the operation, press MENU button on the remote control or
keep no operation for about 10 seconds.
Using the ▲/▼ buttons switches the mode for the BLANK screen.
The BLANK screen is a screen for the temporarily blanking feature
23). It is displayed by pressing BLANK button.
(
MyScreen ORIGINAL
MyScreen
ORIGINAL
BLUE, WHITE,
BLACK
• To avoid remaining as an afterimage, the MyScreen or ORIGINAL
screen will change to the plain black screen after several minutes.
Using the ▲/▼ buttons switches the mode for the start-up screen.
The start-up screen is a screen displayed when no signal or an
unsuitable signal is detected.
MyScreen ORIGINAL
MyScreen
ORIGINAL
TURN OFF
• To avoid remaining as an afterimage, the MyScreen or ORIGINAL
screen will change to the BLANK screen (
minutes. If also the BLANK screen is the MyScreen or ORIGINAL,
the plain black screen is instead used.
• When the TURN ON is selected to the MyScreen PASSWORD of
SECURITY item in OPTION menu (
MyScreen.
Description
DEUTSCH
BLUE WHITE
Feature
Screen can be registered by the MyScreen item
41)
(
.
Screen preset as the standard screen.
Plain screens in each color.
TURN OFF
Feature
Screen can be registered by the MyScreen item
41)
(
.
Screen preset as the standard screen.
Plain black screen.
51), the START UP is fixed to
ESPAÑOL
...
BLACK
40) after several