Hitachi CP-A300N User Manual
  1. Manuals
  2. Brands
  3. Hitachi Manuals
  4. Projector
  5. CP-A300N
  6. User manual
Hitachi CP-A300N User Manual

Hitachi CP-A300N User Manual

Hitachi cp-a300n: user guide
Hide thumbs Also See for CP-A300N:
Table of Contents

Advertisement

Quick Links

See also: Operating Manual , User Manual
Projector
CP-A220N/CP-A300N
User's Manual (concise)
Thank you for purchasing this projector.
Please read through this manual before using this product, in order to use safely
and utilize well the product.
WARNING ►Before using this product, be sure to read all manuals for this
product. See the "Using the CD manual" (20) to read the manuals in the CD.
After reading them, store them in a safe place for future reference.
►Heed all the warnings and cautions in the manuals or on the product.
►Follow all the instructions in the manuals or on the product.
NOTE • In this manual, unless any comments are accompanied, "the
manuals" means all the documents provided with this product, and "the product"
means this projector and all the accessories came with the projector.
Contents
First of all ............................................ 2
Important safety instruction ..............................2
Regulatory notices .............................. 3
Contents of package........................... 4
Arrangement ....................................... 5
Connecting power supply ................... 8
Using the cable cover ......................... 9
(Type nos. CP-A220N, CP-A220NM, CP-A300N, CP-A300NM)
Turning on the power ........................ 11
Operation .......................................... 12
Turning off the power ........................ 14
Replacing the lamp ........................... 15
3
Using the CD manual ....................... 20
Specifications ................................... 21
1

Advertisement

Table of Contents
loading

Related Manuals for Hitachi CP-A300N

Summary of Contents for Hitachi CP-A300N

  • Page 1: Table Of Contents

    Connecting with your devices ... 6 Connecting power supply ... 8 Using the cable cover ... 9 Preparing for the remote control ... 10 (Type nos. CP-A220N, CP-A220NM, CP-A300N, CP-A300NM)  Turning on the power ... 11 Adjusting the projector's elevator ... 12 Operation ...

  • Page 2: First Of All

    ►Do not let any things or any liquids enter to the inside of the product. ►Do not wet the product. ►Do not place the projector where any oils, such as cooking or machine oil, are used. Oil may harm the product, resulting in malfunction, or falling from the mounted position.

  • Page 3: Regulatory Notices

    INSTRUCTIONS TO USERS: Some cables have to be used with the core set. Use the accessory cable or a designated type cable for the connection. For cables that have a core only at one end, connect the core to the projector. CAUTION: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the...

  • Page 4: About Waste Electrical And Electronic Equipment

    (7) Application CD (8) Wall mount unit and User's manual * * CP-A220N/CP-A300N does not bundle them. WARNING ►Do not attempt to install the projector yourself. Have your dealer or service center handle all installation work. Note that manufacturer will accept no liability whatsoever for accidents or injuries resulting from an incorrect installation or improper use.

  • Page 5: Arrangement

    Readjust the image position and/or focus as necessary. • Since the projector features an ultra short throw, be aware that it is required to select a screen carefully to have better performance.

  • Page 6: Connecting With Your Devices

    NOTE • The projector may make a rattling sound when tilted, moved or shaken, since a fl ap to control the air fl ow inside of the projector has moved. Be aware that this is not a failure or malfunction.
  • Page 7 • This projector doesn't support plug-in power for the microphone. • The COMPUTER IN1/2 port can support a component signal also. The specific adapter or the specific cable is required for a component video input to the projector. Microphone system...

  • Page 8: Connecting Power Supply

    WARNING ►Please use extra caution when connecting the power cord, as incorrect or faulty connections may result in fire and/or electrical shock. • Only use the power cord that came with the projector. If it is damaged, consult your dealer to get a new one.

  • Page 9: Using The Cable Cover

    Combine parts as shown in figure, and assemble the cable cover. Insert the three knobs on the cable cover into the three holes on the projector as shown in the figure. Pass the cables through the holes on the bottom of the cable cover.

  • Page 10: Preparing For The Remote Control

    Holding the hook part of the battery cover, remove it. Align and insert the two AA batteries HITACHI MAXELL, Part No.LR6 or R6P according to their plus and minus terminals as indicated in the remote control. Replace the battery cover in the direction of the arrow and snap it back into place.

  • Page 11: Turning On The Power

    NOTE • Please power on the projector prior to the connected devices. • The projector has the DIRECT POWER ON function, which can make the projector automatically turn on. For more information, please see the “Operating Guide” in the CD.

  • Page 12: Adjusting The Projector's Elevator

    The projector has Front foot for inclinations and Rear foot for horizontals. Spacers on the each elevator foot are installed at the time of shipment, and projector is in a condition to be able to just project. If necessary, detach the spacer, and the elevator feet can be manually twisted to make more precise adjustments.

  • Page 13: Selecting An Aspect Ratio

    Press the MUTE button on the remote control. To restore the sound, press the MUTE or VOLUME+/- button. CAUTION ►If you wish to have a blank screen while the projector's lamp is on, use the BLANK function (see the Operating Guide).

  • Page 14: Turning Off The Power

    Do not turn the projector on for about 10 minutes or more after turning it off. Also, do not turn the projector off shortly after turning it on. Such operations might cause the lamp to malfunction or shorten the lifetime of some parts including the lamp.

  • Page 15: Replacing The Lamp

    (5) Press the ► button to select “OK” on the dialog. It performs resetting the lamp time. CAUTION ►Do not touch any inner space of the projector, while the lamp is taken out. NOTE • Please reset the lamp time only when you have replaced the lamp, for a suitable indication about the lamp.
  • Page 16 • Never unscrew except the appointed (marked by an arrow) screws. • Do not open the lamp cover while the projector is mounted on a wall or ceiling. This is dangerous, since if the lamp’s bulb has broken, the shards will fall out when the cover is opened.

  • Page 17: Cleaning And Replacing The Air Filter

    ►Use only the air filter of the specified type. Do not use the projector without the air filter or the filter cover. It could result in a fire or malfunction to the projector. ►Clean the air filter periodically. If the air filter becomes clogged by dust or the like, internal temperatures rise and could cause a fire, a burn or malfunction to the projector.

  • Page 18: Replacing The Internal Clock Battery

    Replacing the internal clock battery This projector has internal clock that uses a battery. When the clock of the network function does not work correctly, please try solution by replacement of the battery: HITACHI MAXELL, part number CR2032 or CR2032H.

  • Page 19: Caring For The Mirror And Lens

    WARNING ►Before caring for the projection mirror and lens, turn the projector off and unplug the power cord, then cool the projector sufficiently. ►Do not use a vacuum cleaner to clean the projection mirror or lens, since it might give some damage.

  • Page 20: Using The Cd Manual

    (2) When “main.html” file is clicked, Web browser will start and Initial window will appear. 2. Click the model name of your projector first, and then click language you want from the displayed list. The User’s manual (detailed) will open.

  • Page 21: Specifications

    USB TYPE B ...USB-Bx1 CONTROL ... D-sub 9 pin x1 LAN ... RJ45 x1 MIC ... Mono mini x1 HAS-203L (Fixing adaptor for low ceilings) HAS-P100 (Fixing adaptor for high ceilings) HAS-K250 (Wall mount unit : only for CP-A220N/CP-A300N) [unit: mm]...

  • Page 22: Troubleshooting - Warranty And After-Service

    If an abnormal operation (such as smoke, strange odor or excessive sound) should occur, stop using the projector immediately. Otherwise if a problem occurs with the projector, first refer to “Troubleshooting” of “Operating Guide” and “Network Guide”, and run through the suggested checks.

This manual is also suitable for:

Cp-a220n

Table of Contents