Daylight Saving Time - La Crosse Technology 616146V4 Faqs

Hide thumbs

Table of Contents

Rotate Projection Image: When you place the clock and the projection looks upside down

or sideways, you can rotate the image to make it readable.

 Press and release the PROJECTION button to rotate the projection image 90

degrees.

 Press and release the PROJECTION button again to rotate another 90 degrees.

Change Projection Mode: Hold, then release the PROJECTION button to switch projection

modes. You will need to watch the projection image to view the changes.

 Time and Outdoor Temperature: alternate every 5 seconds (default)

 Time: Hold and release PROJECTION button

 Outdoor Temperature: Hold and release PROJECTION button again

Projection and Backlight Intensity: The brightness of the projection is adjustable in two

settings: High, and Low.

 HIGH: The projection is defaulted to HI (brightness) when the A/C adapter is in use.

 LOW: Press and release the SNOOZE/LIGHT button to dim the brightness of the

projection.

 Press and release the SNOOZE/LIGHT button to return projection to full strength

(HIGH).

Turn Off: Hold the SNOOZE/LIGHT button to turn the projection Off or On.

Note: The backlight on Low is difficult to see in a well-lit room.

Note: When the Adapter is NOT in use, the High/Low feature is not available.

Note: When you adjust the projection, you adjust the backlight at the same time.

Battery Power: Press and release the SNOOZE/LIGHT button to show the projection for 10

seconds. The projection will not stay on when operation on battery power only.