Table of Contents
Advertisement
Outdoor Temperature is stuck or HH.H, LL.L
Explanation: These symbols are error messages indication the outdoor sensor is outside
of its readable range.
• Check
Batteries.
• Replace outdoor sensor.
Note: The last outdoor reading may remain (not change) for several hours when
connection is lost. The outdoor temperature reading will flash when the connection is first
lost or intermittent.
Outdoor sensor drains batteries quickly
•
Test a new set of alkaline batteries. Write down the date of installation and the voltage
of the batteries.
•
When the batteries fail, please note the date and voltage again.
•
Check the
distance
Outdoor sensors at the end of the range may work while batteries are fresh but not
after they drain a bit.
•
Check for leaking batteries, which may damage the outdoor sensor.
•
Battery life is over 24 months when using reputable battery brands for both Alkaline and
Lithium batteries.
Outdoor sensor fell. The sensor no longer works
Explanation: If there is no physical damage to the outdoor sensor, the fall may not have
caused internal damage. A fall can shock the outdoor sensor or the batteries in the
outdoor sensor. Batteries that have fallen on a hard surface may be damaged and unable
to function properly.
• Complete a
Restart
•
Use
Batteries
dated at least six years in advance of the current year. Batteries dated
earlier than six years from now may still work but may be unstable in performance.
Note: An outdoor sensor that has fallen into puddle, snow, or other standing water, will
likely have water damage and needs to be replaced. Outdoor sensors are water resistant,
not waterproof.
Mounting/Positioning Outdoor sensor
La Crosse Technology, Ltd.
Overpowered or underpowered batteries can cause this reading.
and
resistance
between the outdoor sensor and projection alarm.
with fresh batteries.
www.lacrossetechnology.com/support
Page 5
Advertisement
Table of Contents
