Quick Shift System - Yamaha MT10M 2020 Owner's Manual

2. Wait a few seconds and then turn
the key back to "ON".
3. The " " indicator light should turn
off and the system be enabled.
TIP
If the " " indicator light remains on af-
ter resetting, the vehicle may still be rid-
den; however, have a Yamaha dealer
check the vehicle as soon as possible.
4. Have a Yamaha dealer check the
vehicle and turn off the "
ing light.

Quick shift system

1
" warn-
1. Quick shift icon "QS"
2. Shift switch
The quick shift system allows for
full-throttle, clutch lever-less upshifts.
When the shift switch detects motion in
the shift pedal, engine power and drive
torque are momentarily adjusted to al-
low the upshift to occur.
TIP
The quick shift system operates when
traveling at least 20 km/h (12 mi/h) with
an engine speed of 2000 r/min or high-
er, and only when accelerating. It does
not operate when the clutch lever is
pulled.
EAU79481
NOTICE
To prevent drivetrain damage, al-
2
ways use the clutch lever to shift
when riding at slow speed, when
downshifting, or if the quick shift
system is off.
4-6
Special features
ECA26260
1
2
3
4
5
6
7
8
9
10
11
12