Air Filter Element - Yamaha MT10M 2020 Owner's Manual

1. Coolant reservoir cap
4. Add coolant to the maximum level
mark. NOTICE: If coolant is not
available, use distilled water or
soft tap water instead. Do not
use hard water or salt water
since it is harmful to the engine.
If water has been used instead
of coolant, replace it with cool-
ant as soon as possible, other-
wise the cooling system will not
be protected against frost and
corrosion. If water has been
added to the coolant, have a
Yamaha dealer check the anti-
freeze content of the coolant as
soon as possible, otherwise the
effectiveness of the coolant will
Periodic maintenance and adjustment
be reduced.
5. Install the coolant reservoir cap.
1
Changing the coolant
The coolant must be changed at the in-
tervals specified in the periodic mainte-
nance and lubrication chart. Have a
Yamaha dealer change the coolant.
WARNING! Never attempt to remove
the radiator cap when the engine is
hot.
[EWA10382]
[ECA10473]

Air filter element

The air filter element must be replaced
at the intervals specified in the periodic
EAU33032
maintenance and lubrication chart.
Have a Yamaha dealer replace the air
filter element.
8-15
EAU36765
1
2
3
4
5
6
7
8
9
10
11
12