Shift Pedal; Quick Shift System; Brake Lever - Yamaha Tracer MTT850D 2019 Owner's Manual

Shift pedal

2
1
1. Shift pedal
2. Shift switch
The shift pedal is located on the left
side of the motorcycle and is used in
combination with the clutch lever when
shifting the gears of the 6-speed con-
stant-mesh transmission.
When the quick shift system is turned
on, the shift switch senses shift pedal
movement and allows for upshifting
without operating the clutch lever. (See
page 3-26.)
EAU84320

Quick shift system

The quick shift system (QS) allows for
full-throttle, clutch lever-less, electron-
ically-assisted upshifts. When the shift
switch detects motion in the shift pedal
(page 3-26), engine power and drive
torque are momentarily adjusted to al-
low the upshift to occur.
TIP
The quick shift system operates
when traveling at least 20 km/h (12
mi/h) with an engine speed of
2300 r/min or higher, and only
when accelerating.
It does not operate when the
clutch lever is pulled.
3-26
Instrument and control functions
EAU84330

Brake lever

The brake lever is located on the right
side of the handlebar. To apply the
front brake, pull the lever toward the
throttle grip.
3 4
1. Brake lever
2. Distance
3. Brake lever position adjusting dial
4. Match mark
The brake lever is equipped with a
brake lever position adjusting dial. To
adjust the distance between the brake
lever and the throttle grip, slightly pull
the brake lever away from the throttle
grip and rotate the adjusting dial. Make
sure the setting number on the adjust-
ing dial aligns with the match mark on
the brake lever.
EAU26826
3
1
2