Yamaha YZ250 2022 Owner's Service Manual page 61

1. Brake hose
2. Master cylinder
3. Engine stop switch lead
4. Engine stop switch
5. Throttle cable
6. Clutch cable
7. Clamp
8. Cable guide
A. Install the brake hose so that its pipe portion
directs as shown and lightly touches the pro-
jection on the master cylinder, while the white
paint side faces to the front of the vehicle.
B. Pass the engine stop switch lead in the mid-
dle of the clutch holder.
C. Clamp the engine stop switch lead to the
handlebar. Do not cut the end of the clamp.
D. Pass the brake hose in front of the number
plate and through the cable guide.
E. Pass the clutch cable through the cable guide
on the number plate.
CABLE ROUTING DIAGRAM
2-22