Advertisement
6- CLEAN-UP AND MAINTENANCE
Rinsing Arm
Washing Arm
CAUTION!
Never use cleaning chemicals containing bleaching agents, chlorine or hypochloride.
Never use steel sponge or wire brush for cleaning purposes.
Do not use pressurized water to clean inner and outer surfaces of the appliance.
Before cleaning the interior of the dishwasher, first carefully remove from the boiler any parts that may cause
injury during cleaning, such as sharp glass pieces.
Wipe clean the interior of the dishwasher. Once wastes and particles are removed, re-place the
washing/rinsing arms and filters.
Clean the outer surface of the dishwasher with a damp cloth. Never use wet cloth for cleaning.
After drying, clean with a stainless steel cleaning article.
6.1 Periodical Maintenance and Clean-up
Daily maintenance should be carried out by people informed about
the safety instructions as following, after disconnecting power supply
and water connections.
6.1.1 Daily Maintenance:
Daily maintenance should be carried by the user. In order to clean up
the machine within the day following should be carried out
periodically after the washing operation:
1. Wash and rinse arms should be disconnected and the scraps
remaining in those arms should be removed away using
pressure water, brush, fine wire etc. and reinstalled back to
their places.
2. Scraps remaining in the washing tank should be removed and
cleaned up. (Do not carry out washing operation without
installing scrap filters)
3. If the period between two washing operations exceeds "5
Hours" water outlet pipe should be disconnected and all of the
water should be drained out fully.
4. Suction filter should be disconnected and cleaned up with
plenty of water.
5. Inside of the tank should be cleaned up with a sponge or cloth
and plenty of water.
6. After cleaning operation is finished suction filter, water
outlet pipe, scrap filters and washing and rinsing arms should
be reinstalled.
7. Scale formed on the carriers of the device after certain period
of use, must be wiped away. If it is not cleaned up for a long
time, scale formed on the carriers of the device, hinder the free
movement of the hood.
6.1.2 Periodical Maintenance:
Periodic maintenance should be carried out by the user at least once
in a month, after the cleanup and maintenance that must be
conducted after each washing operation is completed. This should be
done when the machine is ready for operation and before the dishes
are set up in the machine. After ½ kg's of decalcination substance is
added to the washing tank, the machine is operated for ½ hours so
that it cleans itself up. Afterwards the water within the machine is
disposed and then refilled with fresh water. This time the machine is
operated without any additive substance only with water for ½ hours
and after the water inside is disposed, the machine will be ready for
operation.
If the device is not used for long period of time, you must drain the
water left inside the boiler. For this purpose, let the water drain out
after opening the tap (boiler tank tap) at the lower part of the devices
body. Other wise, water staying inside too long, may harm the
resistances.
18
Advertisement
