Advertisement
5.8 Draining:
Excess water generated during the operation of the machine will be automatically removed from the drain. machine
at the end of each day the door should be left open to drain and dry. Before the machine is turned off at the end of
the job boiler water must be completely drained. The drain symbol is touched, the plug is removed and the start
water discharge arrow is selected.
5.8.1 Models without Drain Pump (Drain by Gravity):
Turn off the appliance from the control panel. Open the appliance's door and remove the drain plug in the tank. Now,
machine must start draining. Once draining is complete, re-place the drain plug. Turn off the mains water and power
supply of the appliance.
5.8.2 Models With a Drain Pump (Optional):
In each operation, drain system is automatically activated when rinsing cycle is started. Once washing cycle is
complete, open the door and remove the drain plug. Remove Drain pipe, Press the 'Washing Stop' switch for 3 sec.
when the drain character occure on LCD screen, drainage operation will start automatically. After discharge time
(Factory Settings) finished,the drain pump will stop automatically. After finish the drain process press the'On/Off'
switch for the turn off the machine.
Note: Once draining is complete, it is recommended to disconnect mains water and electrical supply, and clean the
appliance as described. For a more hygienic operation, leave the appliance door open after the draining process to
ensure that boiler is naturally dried.
15
Advertisement
