Kenwood TM-201B Instruction Manual page 3

1. FEATURES
® Compact, slim transceiver for
easy mobility
Microcomputer provides
multi-frequency control
functions
© Dual function keyboard
facilitates memory recall (MR)
¢ High reliability by using PC
boards for each unit; high
sensitivity (12 dB SINAD
0.22 V) front-end using
GaAs FETs
© Quality sound for transmission
and reception
© HI/LOW switch controls output
power
¢ Repeater operation
e Extended frequency range*
OnkWN—
2:
3,
. Coaxial connector with cable greatly reduces effective depth when connec-
ting an antenna cable.
. External speaker system allows installation in any place.
. Remote frequency control unit (FC-10) extends your operation a flexibility.
. Five channel memories plus COM channel.
. ALERT function monitors memory channel 1 (M1).
. Memory scan operation (MS) from memory channels 1 through 5.
. Programmable scan within the selected frequency range.
. 1 MHz step-up function (MHz).
. VFO A in 5 kHz (25 kHz; for European and British versions) steps; VFO B in
5 kHz steps.
. Beeper indicates each of 7 modes.
"Lue
k, blebs
. External communications speaker, 77 mm in dia., supplied.
. Maximum 3% modulation distortion ensures good quality transmit signal.
. COM system facilitates access to repeaters with the TU-3 or TU-3A tone
unit* (option) installed.
The TU-3 or TU-3A 2nd tone frequency (one of 37 frequencies selectable)
interconnected with the TX OFFSET system enables access to a repeater.
The REV switch monitors direct signal.
Covers 142.0 ~ 148.995 MHz in 5 kHz steps.
(Specifications guaranteed for the 144 ~ 148 MHz Amateur band only)