Kenwood TM-201B Instruction Manual page 9

3. INSTALLATIONS AND CONNECTIONS
@ ANTENNA
@ MOBILE INSTALLATION
¢ Interconnection
® Installation location
The performance of the transceiver depends to a great extent upon the type of
antenna to be used. To ensure the maximum performance of the TM-201B,
select a suitable antenna and adjust it for low VSWR.
The TM-201B is equipped with an external speaker.
HTT
MI
J
UUUUUU
To antenna
Lh
+> Red + Red
Using the supplied mounting bracket, install the transceiver under the
dashboard or on the side of the console in your car as shown.
If your car is equipped with an electronic fuel injector, the transceiver should be
mounted as far from the contro! equipment as possible.
Under driver's seat
Side of —
console
Speaker
Cushion (A) ~~
Example 2-3
|
cur
The transceiver should be
located away from your knees.
Under the
dashboard
SPEAKER INSTALLATION
Note: For safetys sake, do not install the speaker on the ceiling.
Tapping screw
($4 x 8)
Example 1-2 // Mounting bracket Example 2-2
Example 2-1 Nut (to $4)
Me ry) eer A rae roll
\
Fe
: \, Mounting
Mounting
( surface surface
\ 4
(> pana © © © 0} Tapping screw Round head
scre\
ath 98x) pene) (ax 10)
Bracket
~ Mounting
surface
Speaker a
Exai 2-1
Cushion (A) note 258
Example 2-4
Cushion (A)
Cushion (A)
Bracket