Configure Network - Digital Watchdog DW-BJER2U Quick Start Manual

STEP 3:

Configure Network

Please have the following information ready before starting the network configuration.
STEP 3: Configure Network
Please have the following information ready before starting the network configuration.
IP Address
Subnet Mask / Netmask
* Camera Network and Local Network cannot be on the same network.
Default Gateway / Gateway
DNS Servers
* Camera Network and Local Network cannot be on the same network.
NOTE
The Blackjack Cube's network settings are set to DHCP as default.
NOTE If you are not sure what information to enter, contact your Network Administrator or Internet Service
Provider for the information.
Windows
Windows
1. Double click Network Connections on the Desktop
1. Double click Network Connections on the Desktop
2. Right click on the Ethernet with cable connected and click Properties.
2. Right click on the Ethernet with cable connected and click Properties.
3. Click Internet Protocol Version 4 (TCP/IPv4) and click Properties
3. Click Internet Protocol Version 4 (TCP/IPv4) and click Properties
3. Click Internet Protocol Version 4 (TCP/IPv4) and click Properties
3. Click Internet Protocol Version 4 (TCP/IPv4) and click Properties
4. Select Use the following IP address (Use the following DNS server addresses will be selected automatically)
4. Select Use the following IP address (Use the following DNS server addresses will be selected automatically)
5. Enter IP address and Subnet mask of the camera network. (do not enter anything for the Default gateway, Preferred DNS server and Alternate
IP Address
Subnet Mask /
Netmask
Default Gateway /
Gateway
DNS Servers
NOTE The Blackjack Cube's network settings are set to DHCP as default.
NOTE If you are not sure what information to enter, contact your Network Administrator or Internet Service Provider
for the information.
Camera Network
Not Applicable
Camera Network
Not Applicable
Not Applicable
Not Applicable
Quick Start Guide
Local Network (LAN)
Local Network (LAN)
5