Maytag MLG22PRTKW Installation Instructions Manual page 28

ELECTRONIC CONTROL SETUP INSTRUCTIONS ELECTRONIC CONTROL SETUP INSTRUCTIONS
Start Operating Set-up
Washer/dryers are preset at the factory and do not require any
programming. However, if you want to change the settings, follow
the "Set-Up Codes" guide.
The code at the beginning of each segment is the factory default
setting for the PD Models and is the same for the PN/PR Models
unless noted otherwise.
The set-up code is indicated by the one or two left-hand characters.
The set-up code value is indicated by the two or three right-hand
characters.
Set-Up Codes
Code Explanation
6 06 REGULAR PRICE CYCLE (DRYER)
6 06 Represents the number of Coins or Debit
inputs needed to start the dryer; may adjust
from 0-200 (see b.05 set-up for value of
Coins or Debit inputs. Advance from 0-200 by
pressing HEAVY DUTY.
6 00 PN/PR Models Only: Factory default of 6 00 or
0.
CYCLE VEND PRICE (WASHER)
NORMAL Regular Cycle Vend Price—
6 07
Represents the number of Coins or Debit
NORMAL
inputs needed to start the washer. Increase
between 0 and 200 by pressing the
POWERWASH button and decrease by
pressing TEMPERATURE button.
PN/PR models only: Factory default of 6 00 or
6 00
0.
NORMAL
DELICATES Regular Cycle Vend Price—
6 07
Represents the number of Coins or Debit
DELICATE
inputs needed to start the washer. Increase
between 0 and 200 by pressing the
POWERWASH button and decrease by
pressing the TEMPERATURE button.
PN/PR models only: Factory default of 6 00 or
6 00
0.
DELICATE
POWERWASH Regular Cycle Vend
6 07
Price— Represents the number of Coins
POWERWASH
or Debit inputs needed to start the washer.
Increase between 0 and 200 by pressing
the POWERWASH button and decrease by
pressing the TEMPERATURE button.
PN/PR models only: Factory default of 6 00 or
6 00
0.
POWERWASH
Press the EXTRA RINSE button once to
advance to next code.
7 05 REGULAR DRY TIME (DRYER)
7 05 PD Models: Represents the number of minutes
per Coins or Debit inputs. Factory default of
5 minutes per coin. Example:
Six coins x 5 minutes = 30 minutes. By pressing
the HEAVY DUTY button, value adjusts from
1-99 minutes.
PN/PR Models: Represents the cycle length
7 45
for free cycles. Example: "7 45" = 45 minutes.
7 11 WASH LENGTH (WASHER)
This is the number of minutes for wash. Washer
7 11
comes from the factory preset with 11 minutes.
Choose from 9-17 minutes by pressing the
POWERWASH button and decrease by
pressing the TEMPERATURE button.
Press the EXTRA RINSE button once to
advance to next code.
28
Code Explanation
8 00 TYPE OF DRYER PRICING (DRYER)
8 00 Fixed cycle with top off. For detailed
description, see "General User Information. "
PN/PR models only: Factory default of FC.
8 FC
Fixed Cycle. For detailed description, see
"General User Information. " Use DELICATES
button to make this selection.
8 00 ADDITIONAL RINSE OPTION (WASHER)
NOTE: Use this field to exit Service Mode by
pressing the LOWER LEFT key pad when
operating as Free Vend.
Additional Rinse not selected Off.
8 00
Press and hold the TEMPERATURE button to
exit Service Mode.
Additional Rinse selected, On.
8 AR
Press the DELICATES button to change
settings between 00 and AR.
Press and hold the TEMPERATURE button to
exit Service Mode.
Press the EXTRA RINSE button once
to advance to next code.
9 00
CYCLE COUNTER OPTION (WASHER)
This option is either selected On or not
selected Off.
9 00 Not selected Off.
9 0C Selected On and not able to be deselected.
Press DELICATES button three consecutive
times to select On. Once On is selected, it
cannot be deselected.
Press the EXTRA RINSE button once
to advance to next code.
1.00 MONEY COUNTER OPTION (WASHER)
This option is either selected On or not
selected Off.
Not selected Off.
1.00
1.0C Selected On.
Press DELICATES button three consecutive
times to select On and three consecutive times
to remove (not selected Off).
Counter resets by going from Off to On.
Selected On and not able to be deselected.
1.C0
To select On and not able to be deselected,
first select On; then within two seconds press
DELICATES twice, POWERWASH once, and
exit the set-up mode.
Press the EXTRA RINSE button once
to advance to next code.
2.00 SPECIAL PRICING OPTION (WASHER)
This option is either selected on or not
selected Off.
Not selected off.
2.00
2.SP Selected on. Press the DELICATES button
once for this selection.
If special pricing option is selected, you have access to codes
"3. " through "9. "
NOTE: An external battery needs to be added to keep the clock
running during periods of power outages.
Press the EXTRA RINSE button once
to advance to next code.