Table of Contents
Advertisement
Chapter 9 Network Settings
9
Click Yes to restart the TeraStation. If you select "No", make sure you restart the TeraStation at a later time to
apply port trunking settings.
10
The process is complete after the TeraStation has been restarted.
SNMP
If SNMP is enabled, you can browse your TeraStation from SNMP-compatible network management software.
Examples of frequently-notified traps are described in the
1
From Settings, click Network.
2
Move the SNMP switch (
3
Click the settings icon (
4
Click Edit.
) to the
) to the right of "SNMP".
223
"Relevant Trap List"
subsection below.
position to enable SNMP.
Advertisement
Table of Contents
