System Operation; System Power - Safety Vision 56BA-AHD User Manual

56BA-AHD/70BA-AHD USER GUIDE
The monitor is sensitive to the timing that the - and + buttons are pressed. If
at first TO B2 RESET does not appear on the screen, try again, pressing the
buttons more slowly and consistently.
(or more quickly)
When the monitor is powered up again, press the Power button to switch
between cameras 1 and 2.

SYSTEM OPERATION

System Power

In typical installations, the system is placed into standby mode automatically
when the sensor wire for the vehicle ignition is activated, and the monitor
automatically displays camera input when the sensor wire for the vehicle
backup lights is activated. The system can also be powered on and off
manually with the Power button on the front panel of the monitor.
8