Wiring - Safety Vision 56BA-AHD User Manual

WIRING

Connect the 13-pin DIN connector on the wiring harness to the 13-pin
1
DIN connector on the monitor cable.
Connect the camera extension cable to the connector labeled as
2
"Camera 1" on the wiring harness.
Connect the individual wires on the wiring harness as follows:
3
WIRE COLOR
Red
Black
Green (Trigger 1)
White (Trigger 2)
(Optional)
Yellow (Audio)
56BA-AHD/70BA-AHD USER GUIDE
Ignition
Chassis ground
Reverse
(typically the wire for the backup
When this wire has 12 VDC, the monitor receives
•
input from camera 1.
Vehicle wire that has 12 VDC when a separate event
(such as activating a turn signal)
When this wire has 12 VDC, the monitor receives
•
input from an optional camera 2.
Note
Camera 1 input takes priority over Camera 2 input.
Camera 1 audio
DESCRIPTION
occurs.
lights).
6