Assembly - iFIT Pro-Form Carbon TLX PFTL90924.1 User Manual

ASSEMBLY

• Assembly requires two persons.
• Place all parts in a cleared area and remove the
packing materials. Do not dispose of the packing
materials until you finish all assembly steps.
• After shipping, there may be an oily substance
on the exterior of the treadmill. This is normal. If
there is an oily substance on the treadmill, wipe
it off with a soft cloth and a mild, non-abrasive
cleaner.
1. Go to my.proform.com and register your
product.
• documents your ownership
• activates your warranty
• ensures priority customer support if assistance
is ever needed
2. Locate the included cardboard support (A) and
unfold it to the position shown, with the two
cutouts (B) in the indicated locations.
Then, lift the back end of the Frame (48), and
insert it into the cutouts (B). The cardboard sup-
port (A) will make it easier for you to do steps 3
and 4.
• To identify small parts, see page 7.
• Left parts are marked "L" or "Left" and right parts
are marked "R" or "Right."
• Assembly can be completed using the included
tools. Note: One or more of the included tools
may be needed to make adjustments in the
future. To avoid damaging parts, do not use
power tools for assembly or adjustment.
1
2
B
48
A
8