How To Fold And Move The Treadmill - iFIT Pro-Form Carbon TLX PFTL90924.1 User Manual

HOW TO FOLD AND MOVE THE TREADMILL

HOW TO FOLD THE TREADMILL
Before folding the treadmill, adjust the incline of
the treadmill to 0% to avoid damaging the treadmill.
Then, remove the key and unplug the power cord.
CAUTION: You must be able to safely lift 45 lbs.
(20 kg) to raise, lower, or move the treadmill.
1. Hold the metal frame (A) firmly in the location
shown by the arrow below. CAUTION: Do not
hold the frame by the plastic foot rails. Bend
your legs and keep your back straight. Raise the
frame about halfway to the vertical position.
1
A
2. Raise the frame (A) until the storage latch (B) locks
in the storage position. CAUTION: Make sure that
the storage latch locks.
2
A
B
To protect the floor or carpet, place a mat under the
treadmill. Keep the treadmill out of direct sunlight. Do
not leave the treadmill in the storage position in tem-
peratures above 85°F (30°C).
HOW TO MOVE THE TREADMILL
Before moving the treadmill, fold it as described at the
left. CAUTION: Make sure that the storage latch is in
the locked position. Moving the treadmill requires
two people. Take any necessary measures to avoid
damaging your floor.
1. Hold the
frame (A) and
one of the
handrails (E),
and place one
foot against a
wheel (F).
2. Pull back on the handrail (E) until the treadmill
will roll on the wheels (F), and carefully move the
treadmill to the desired location. CAUTION: Do not
move the treadmill without tipping it back, do
not pull on the frame (A), and do not move the
treadmill over an uneven surface.
3. Place one foot against a wheel (F), and carefully
lower the treadmill.
HOW TO LOWER THE TREADMILL FOR USE
1. Push the upper end of the
frame forward, and gently
press the upper part of the
storage latch with your foot
at the same time.
2. While pressing the storage
latch with your foot, pull
the upper end of the frame
toward yourself.
3. Step back and let the
frame descend to the floor.
24
1
A
E
F
1
2