Setting The Hdmi Signal Format - Yamaha TRUE X BAR 50A User Manual

CONFIGURATION > Setting the HDMI signal format

Setting the HDMI signal format

When some AV devices are connected to the sound bar, no sound can be heard, the colors of the video are
not normal, or other abnormal conditions may occur.
Switching between the following modes may improve such conditions.
Mode 1
Mode 2
Default setting: Mode 1
1
Turn off the sound bar.
2
Press and hold STEREO on the remote control for at least five seconds.
The indicators show the setting status as follows, and the sound bar is turned on.
Glows: Mode 1
Off: Mode 2
Select this mode for normal use.
Select this mode if an error occurs such as abnormal video.
73