Selecting The Hdmi Signal Format - Yamaha YAS-209 Owner's Manual

3
Within 30 seconds, press and hold the PAIRING button
on the rear panel of the subwoofer for at least five
seconds.
When the center unit and subwoofer have been paired
successfully, the * indicator will glow.
If the * indicator on the subwoofer does not glow after following the
procedure described here, see "No sound is coming from the
subwoofer" (p.50).
*
indicator
PAIRING button

Selecting the HDMI signal format

Problems such as a lack of sound or the appearance of abnormal colors
in a video may occur when some AV devices are connected to the unit.
Should this occur, changing the setting may resolve these issues.
Mode 1 (default) Select this mode in most cases.
Select this mode if problems such as the appearance of
Mode 2
abnormal colors in video have occurred.
1
Turn on the unit.
2
Press STEREO for at least five seconds.
STEREO
Once the indicator has shown the setting applied to the unit
as follows, the unit will turn on.
Glows (mode 1)
Off (mode 2)
43
En