Yamaha TRUE X BAR 50A User Manual page 53

PLAYBACK > Listening to audio from a Bluetooth® device
3
Select the sound bar on the Bluetooth device.
When the connection is established, the BLUETOOTH indicator on the sound bar stops flashing
and starts glowing blue.
Glows blue
4
Start playback on the Bluetooth device.
The sound bar will begin playing audio from the Bluetooth device.
NOTE
Enabling the network standby function allows the sound bar to be turned on automatically when a Bluetooth device connects to it.
(
If other Bluetooth devices have been connected before, the sound bar will connect to the last connected device when the input
(
source is switched to Bluetooth.
The Bluetooth connection is terminated if one of the following operations is performed.
(
The Bluetooth function of the Bluetooth device is turned off.
(
BLUETOOTH on the sound bar's remote control is held down for at least five seconds.
(
An input source other than Bluetooth is selected on the sound bar.
(
Turn off the sound bar.
(
Adjust the volume level of the Bluetooth device if necessary.
(
Audio from a Bluetooth device is played in stereo regardless of the sound mode setting.
(
Related links
"Enabling/disabling the network standby function" (p.67)
Yamaha SR-X50A xxxxxx
53