Table of Contents
Advertisement
798 Display messages and warning/indicator lamps
Display messages
Cannot start vehicle See
Owner's Manual
Possible causes/consequences and
If the operating safety of your vehicle is impaired, park the vehicle immediately and safely. Contact a qualified special-
ist workshop.
Plug-in hybrid:
& WARNING Risk of accident due to failure of the driver display
In the event that the driver display fails or malfunctions, you will not recognise function restrictions affecting sys-
tems relevant to safety. This may impair operating safety.
Park the vehicle safely as soon as possible and notify a qualified specialist workshop.
#
If the driver's display fails, you may not recognise function restrictions affecting systems relevant to safety or the
speed display, for example. The operating safety of the vehicle may be impaired (
Have the vehicle checked by a qualified specialist workshop immediately.
#
* The vehicle cannot be started.
Switch the vehicle off and switch it back on
#
If the display message still appears, consult a qualified specialist workshop.
#
* Vehicles with 48 V on-board electrical system: the state of charge of the 48 V battery is too low. You can no longer
start the vehicle.
Switch off electrical consumers that are not required.
#
Connect a suitable charger approved for Mercedes-Benz with sufficient charge output to the jump-start connection
#
point of the 12 V battery (
The 48 V battery is charged via the voltage converter in the vehicle.
Solutions
M
page 50).
/
F118 0058 02
page 453).
/
Advertisement
Table of Contents
