Table of Contents
Advertisement
312 Driving and parking
Releasing
Switch on the vehicle.
#
Pull handle 1.
#
The red ! indicator lamp in the driver's
display goes out.
▌Emergency braking
Press and hold handle 1.
#
As long as the vehicle is in motion, the
Release parking brake
message is displayed
and the red ! indicator lamp flashes.
When the vehicle has been braked to a stand-
still, the electric parking brake is applied. The
F118 0058 02
red ! indicator lamp lights up in the driv-
er's display.
Information on collision detection on a parked
vehicle
If a collision is detected on the locked vehicle
when towing protection is switched on, and the
collision detection is switched on, when the vehi-
cle is switched on, you will receive a message in
the multimedia system.
You will receive information about the following
points:
The area of the vehicle that may have been
R
damaged.
The force of the impact.
R
The following situation can lead to inadvertent
activation:
Forexample, the parked vehicle is moved to a
R
two-storey garage.
Advertisement
Table of Contents
