Table of Contents
Advertisement
Slide the safety vest bag
1
#
edge of the armrest into the safety vest com-
partment. Ensure that the loop
so that it is easy to reach.
%
Remove the packaging film before sliding it
into the safety vest compartment for a new
safety vest. Otherwise, it may cause uninten-
tional slipping or make removing difficult.
Observe the legal requirements in the individ-
ual countries.
1
Maximum number of washes
2
Maximum wash temperature
3
Do not bleach
4
Do not iron
along the lower
5
Do not tumble dry
6
Do not dry clean
2
hangs out
7
Class 2 safety vest
The requirements defined by the legal standard
are only fulfilled if the safety vest is the correct
size and is fully closed.
Replace the safety vest in the following cases:
The reflective strips are damaged or dirty
R
The maximum permissible number of washes
R
is exceeded
The fluorescence property decreases, e.g. due
R
to permanent exposure to sunlight.
Dispose of the safety vest in an environmentally
friendly way:
Please contact your local waste disposal com-
R
pany.
F118 0058 02
Quick start and Tips
Removing the warning triangle
Remove warning triangle 1.
#
Depending on the vehicle version, the warning tri-
angle
1
is located in a different holding fixture
under the load compartment floor.
49
Advertisement
Table of Contents
