Crown DBC NETWORK BRIDGE 137769-3 Operation Manual page 72

DBC Network Bridge
6 Troubleshooting
If the DBC Network Bridge seems to be functioning in unex-
pected ways, go to the Signal Path tab and select
Advanced. If the unit is set up for Preset 32, Standard Cin-
ema Setup, only four icons in each channel should be lit.
These icons are input level, input delay, input path filter, and
output level (as in Figure 6-1). If other icons are lit as in the
example Figure 6-2, the unit is no longer functioning as a
cinema bridge, but as a mixer.
To return to the normal Cinema Setup, go to the
Unit Presets tab and select Preset 32, Standard Cinema.
Figure 6.2 Example of Advanced Signal Path Window with Extra Icons Enabled
Figure 6.1 Advanced Signal Path Window with Preset-32 Icons Enabled
page 72 Operation Manual