Getting Started With the DBC Network Bridge
8. The processing functions appear. Click on the Unit
Presets tab at the top. The Unit Presets window appears
(Figure 1.14).
9. At the bottom right, select Preset 32, Standard Cinema.
Then select Recall this Preset. Your system is running
and ready to configure. Please continue reading the man-
ual.
If there are problems, please re-read Section 1.2.3 on
addressing rules. Also read Chapter 6, Troubleshooting.
page 12
Figure 1.14 The Unit Presets Window
DBC Network Bridge
Operation Manual