Advanced Form Firmware Features - Crown DBC NETWORK BRIDGE 137769-3 Operation Manual

DBC Network Bridge
5 Advanced Operation

5.3 Advanced Form Firmware Features

This section explains the advanced signal-path features in the
DBC Network Bridge.
21 22 23
24 25
From the Signal Path tab, click on the Advanced button at the
top. This opens the Advanced Form window (Figure 5.16). Its
2 3 4 5 6 7 8 9
1 10 11 12 13 14 15
16 17
functions are listed below, and each function is explained in the
following pages.
Note that most functions are duplicated on all the input and out-
put channels. Also, the Input EQ Filters and Input Compressor
were covered earlier in Section 4.
1. Input Select
Toggles between analog/digital input or CobraNet input.
2. Input Path
3. Input Level/Polarity/Mute (same as 2)
4. Input EQ Filters (see Section 4.7.4)
5. Input Delay
6. Input Gate
7. Auto Level Settings
8. Input Compressor (see Section 4.7.2)
9. Auto-mix Controls
10. Input Path Filter (Same as Input Filter - see Section 4.7.4)
11. Output Path
12. Same as 11
13. Output Delay
14. Output EQ Filters (Same as Input EQ Filter - see Section
4.7.4)
15. Ambient Leveler
16. Output Limiter
17. Output Path (Same as 11)
18. CobraNet Output = Input Path or Output Path
19. View CobraNet Input (same as CobraNet tab > CobraNet
Input)
20. View CobraNet Output (same as CobraNet tab > Cobra-
Net Output)
21. Inputs button: View all input sections
22. Auto-mix Matrix Button
20
19
23. Auto-mix Groups Button
24. Solo/Mute Button
25. Outputs Button: View all output level controls
18
Figure 5.16 Advanced Form Window in the Signal Paths Tab
page 54 Operation Manual