Operation Examples; Menu Tree - Crown DBC NETWORK BRIDGE 137769-3 Operation Manual

DBC Network Bridge
4 Operation

4.3.2 Operation Examples

Operation Example 1
How to select Preset 5 using the LCD Control Screen:
1. After power-up, the Preset Screen appears.
2. Press Next until you see Preset 5.
3. Within 2 seconds, press Menu/Select.
Operation Example 2
How to select the Digital/Surround Input using the LCD Control
Screen:
1. After power-up, press and hold Menu/Select until the Input
Board Menu appears.
2. Press Next until the arrow is by Digital/Surround.
3. Within 2 seconds, press Menu/Select. Digital/Surround will be
highlighted, showing that it is selected.
Operation Example 3
How to read the unit's addresses:
1. After power-up, press and hold Menu/Select until the Address
screen appears.

4.3.3 Menu Tree

As a handy reference, Figure 4.4 shows the menu structure of the
LCD control screen.
Operation Manual
MENU TREE
PRESET SCREEN
Hold Menu/Select
SCENE SCREEN
Hold Menu/Select
ADDRESS SCREEN
Hold Menu/Select
Next
INPUT BOARD MENU
Prev
Hold Menu/Select
FIRMWARE INFO SCREEN
Hold Menu/Select
Figure 4.4 Menu Tree of the DBC Network Bridge LCD Control Screen
Next
1
When desired Preset # appears,
press Menu/Select to select it.
32
Prev
Next
1
When desired Scene # appears,
press Menu/Select to select it.
32
Prev
When arrow is by the desired Input,
press Menu/Select to select it.
page 23