1 2
EAM30467
CHECKING THE GEAR POSITION SWITCH
1. Remove:
• Gear position switch
2. Check:
• Gear position switch
Out of specification Replace.
3.
Digital circuit tester (CD732)
90890-03243
Model 88 Multimeter with tachom-
eter
YU-A1927
Continuity
Positive tester probe
Sky blue "1"
Negative tester probe
Sensor terminal "a"
Continuity
Positive tester probe
Pink "2"
Negative tester probe
Sensor terminal "b"
Continuity
Positive tester probe
Pink "2"
Negative tester probe
Sensor terminal "c"
Continuity
Positive tester probe
Yellow/White "3"
Negative tester probe
Sensor terminal "d"
Continuity
Positive tester probe
Yellow/White "3"
Negative tester probe
Sensor terminal "e"
Continuity
Positive tester probe
Yellow/White "3"
Negative tester probe
Sensor terminal "f"
ELECTRICAL COMPONENTS
f
b
a
EAM30496
CHECKING THE INJECTOR
1. Remove:
• Fuel injector
Refer to "THROTTLE BODY" on page 7-4.
2. Check:
• Fuel injector resistance
Out of specification Replace.
Resistance
12.0
a. Disconnect the fuel injector coupler from
the fuel injector.
b. Connect the digital circuit tester () to the
fuel injector coupler.
Digital circuit tester (CD732)
90890-03243
Model 88 Multimeter with tachom-
eter
YU-A1927
• Positive tester probe
Injector terminal "1"
• Negative tester probe
Injector terminal "2"
1
c. Measure the fuel injector resistance.
8-71
3
2
e
Y/W P
Sb
d
1
c
2