Bolt [1]
3rd
Specified angle
90
k. Perform the same procedure with the bolts
[2]–[4] one by one and applying the tight-
ening sequence (f)–(j) as shown for the
bolt [1].
TIP
Do not loosen any other bolt until one bolt is
completely tightened.
Bolt [2]–[4]
2nd
23 N·m (2.3 kgf·m, 17 lb·ft)
3rd
Specified angle
90
l. Put a mark on the corner of the bolt (cylin-
der head) and the cylinder head.
m. Retighten the cylinder head mounting
bolts in the proper tightening sequence.
Final
Specified angle
60
n. Tighten the bolts to the specified torque.
Bolt [5], [6]
10 N·m (1.0 kgf·m, 7.4 lb·ft)
90˚
5-24
CYLINDER HEAD