Kärcher WV 1 Plus Instruction Manual page 9

4. Pull the squeegee blade over the
surface to be cleaned to vacuum up
the waste water.
Note
Only work with the device until the
MAX mark of the waste water tank is
reached. Switch off the device and
empty the waste water tank (see chap-
ter Emptying the waste water tank).
Note
The LED indicator light starts to flash
when the battery is low. The device
then switches off after a certain amount
time.
Note
Hard-to-reach surfaces can be vacu-
umed both horizontally and above
head height to a limited extent.
Interrupting operation
1. Set the power switch to "OFF".
The device switches off.
2. Place the device on a level surface.
Emptying the waste water tank
Empty the waste water tank when it is
filled up to the MAX mark.
1. Switch off the device.
2. Remove the cap on the waste water
tank.
a Turn the cap on the waste water
tank to release the lock.
b Pull the cap from the tank.
3. Empty the waste water tank.
4. Put the cap back on the waste water
tank.
5. Insert the waste water tank into the
device.
English 9