Troubleshooting Guide - Kärcher WV 1 Plus Instruction Manual

3. Pull the squeegee blade sideways
out of the suction nozzle.
4. Clean the squeegee blade and suc-
tion nozzle under running water.
5. After drying, pull the squeegee
blade into the suction nozzle from
the side.
6. Push the suction nozzle into the de-
vice until it audibly latches into
place.
Cleaning the microfiber wipe
cover
1. Remove the microfiber wipe cover
from the wiping attachment or
adapter.
2. Wash the microfiber wipe cover un-
der running water.
3. The microfiber wipe cover can be al-
ternatively cleaned in a washing ma-
chine at temperatures of up to 140
°F (60 °C).
Observe the following instructions on
caring for the device:
● Do not use fabric softeners.
● Do not bleach the microfiber wipe
cover.
● Do not dry the microfiber wipe cover
in a dryer.
● Do not iron the microfiber wipe cov-
er.

Troubleshooting guide

Malfunctions often have simple causes
that you can remedy yourself using the
following overview. When in doubt, or
in the case of malfunctions not men-
tioned here, please contact your autho-
rized Customer Service.
With increasing aging, the capacity of
the battery will decrease even with
good care, so that even when fully
charged, the full run time is no longer
achieved. This is not a defect.
The device is not working
The battery is not fully charged.
 Charge the battery.
The device is defective.
 Contact the Service department.
The spray bottle is not working
There is no water/detergent in the
spray bottle.
 Fill the spray bottle with water/deter-
gent.
The pump mechanism in the spray
head is defective.
 Contact the Service department.
Streaks occur during the cleaning
process.
 To prevent the formation of streaks,
see chapter Starting operation.
English 11