Hinge Rail; Emergency Hinge Rail Safety Pin - Harmar Mobility UP STAIRLIFT Owner's Manual

HINGE RAIL

In case of obstacles, such as doors, the hinge rail
is an optional folding rail to better accommodate
your stairs' and landing's layout. The hinge rail is an
extra option to the stairlift and must be requested
upon order. The hinge rail has an additional station
configured on which the stairlift detects the hinge
rail — this is not a charging station. When driving
towards the hinge rail station, the stairlift will stop
and activate the hinge rail. Keep holding the joystick
while the hinge rail is folding. Should you feel the
need to end this motion, release the joystick to
pause the hinge rail's movement.
After getting off, use the remote control to send this
stairlift off the hinge rail and towards the charging
station. The hinge rail folds automatically and the
stairlift stops at the nearest charging station.
UP STAIRLIFT: SECTION 3
EMERGENCY
HINGE RAIL SAFETY PIN
In case of an emergency when the door is blocked,
and the stairlift is not stationed on the hinge rail, it
is possible to remove the safety pin in the hinge rail.
This makes it possible to manually fold the hinge
rail.
CAUTION
!
Removing the hinge rail safety pin makes the hinge
rail unusable. Do not remove the safety pin under
any circumstance unless an emergency.
UP STAIRLIFT:
28JULY2023 | 630-00160-A
OPERATION
Owner's Manual
13