Troubleshooting; Environmental Protection - Raider PRO 039713 User Manual

www.raider.bg
16
STORAGE
Storing in a place below 122°F (50°C) and out of the reach of children.
TROUBLE SHOOTING
Before asking for repairs, conduct your own inspection first. If you find a problem that is
not explained in the manual, do not attempt to dismantle the tool. Instead, ask Euromaster
Import-Export LDT Service Centers, always using Raider replacement parts for repairs.
State of abnormality
The LCD Charge
indicator are still off after
connecting the charger
to the power source
(receptacle).
The battery cartridge
not charging.
There is no cooling
sounds heard during
Charging

ENVIRONMENTAL PROTECTION

In order to protect the environment, the power tool and packaging must be subjected to
appropriate processing for the reuse of their contents raw materials. Do not dispose of power
tools with household waste! According to the Directive of the European Union 2012/19/EC
concerning end-of-life electrical and electronic equipment devices and the approval and as
a national law power tools that cannot to be used more, they must be collected separately
and subjected to an appropriate processing for the recovery of the raw materials contained
in them.
Probablecause
(malfunction)
The charger is not well
connected to the suitable
power source
(receptacle).
The charger or its cable is
Damaged.
The LCD Charge Indicator
is damaged.
The battery cartridge
is hot or ambient
temperature is very cold
or hot.
The battery is not in
position or damaged.
The cooling fan is
damaged
Remedy
Make sure the power source
voltage is same as that stated
on the charger nameplate, and
correctly connected.
Replace with a new one.
Ask your local authorized
service center for repair.
Cool down the battery
cartridge, and recharge at room
temperature.
Re-insert battery fully in
position, if still not charging,
replace the battery.
Ask your local authorized
service center for repair.