Raider PRO 039713 User Manual page 13

12. Using an exhausted battery will damage the charger.
13. Bring the battery to the shop from which it was purchased as soon as the post-charging
battery life becomes too short for practical use. Do not dispose of the exhausted battery.
14. Do not insert objects into the air ventilation slots of the charger. Inserting metal objects
or flammable into the charger air ventilation slots will result in an electrical shock hazard or
damage to the charger.
BEFORE USE
The workplace should be well cleaned, remove unnecessary items. Ensure that lighting
and ventilation is adequate.
CHARGING METHOD
NOTE: Before plugging into the receptacle, make sure the following points.
The power source voltage is stated on the nameplate.
The cord is not damaged. WARNING: Do not charge at voltage higher than indicated on
the nameplate. If charged at voltage higher than indicated on the nameplate, the charger
will burn up.
1. Connect the battery charger's power cord to the receptacle(power source). When
connecting the plug of the charger to a receptacle, the charger will convert to pre-charge
mode. WARNING: Do not use the electrical cord if damaged. Have it repaired immediately.
2. Insert and slide the battery onto the charger along the guide rail, the charger will
convert
to regular charging mode.
13