Page 4
XENIT II USER MANUAL VER. 2.0 XENIT II FEATURES The XENIT II Trike is for all those pilots who want to fly alone or with a passenger in a light but solid vehicle which is also cost-efficient, low- maintenance and easy to transport.
XENIT II USER MANUAL VER. 2.0 SPECIFICATIONS AND DIMENSIONS MODEL COSMOS 300 THOR 303 Cycle 2 strokes 2 strokes Swept 293.9 cc 281 cc volume Power 36 HP at 7.500 RPM 38 HP at 8000 R.P.M. Airbox silencer - Diaphragm carburetor,...
Page 6
XENIT II USER MANUAL VER. 2.0 OVERALL DIMENSIONS cm. 201 / ft. 6,6 cm. 187 ft. 6,1 cm. 189 / ft. 6,2 Page 6...
XENIT II USER MANUAL VER. 2.0 FRAME ASSEMBLY Frame assembly and disassembly is very fast and easy. The best way is to proceed in the following order: Remove the belt. Position part n. 1 Place the back end of the carriage on a box or any kind of support of Lift the back end of the carriage.
XENIT II USER MANUAL VER. 2.0 MOUNTING THE PROPELLER MONO OR TANDEM FLIGHT SETUP EMERGENCY PARACHUTE “A” ASSIST SYSTEM ENGINE START AND STOP WARRANTY Page 10...
Page 11
Fly Products, will repair the product free-of-charge. In no event shall Fly Products be liable to the Purchaser or any other person for any loss or damage whether direct ot indirect or consequential or incidental, including without limitation, any damages or claims by third parties caused by defective products or otherwise arising from the incorrect or otherwise improper use of this product. This...
Page 12
XENIT II USER MANUAL VER. 2.0 NOTE Page 12...