Download Print this page
Hide thumbs Also See for ECO 2 LIGHT:

Advertisement

Quick Links

V 2.06
FLY
© Copyright by
Products s.r.l.
Via Perù n. 30 - 63066 GROTTAMMARE (AP) - ITALY tel./fax +39.735.632486
www.flyproducts.com -  fly@flyproducts.com

Advertisement

loading

Summary of Contents for Fly Products ECO 2 LIGHT

  • Page 1 V 2.06 © Copyright by Products s.r.l. Via Perù n. 30 - 63066 GROTTAMMARE (AP) - ITALY tel./fax +39.735.632486 www.flyproducts.com -  fly@flyproducts.com...
  • Page 2 ECO 2 LIGHT ASSEMBLY MANUAL ____ VER. 2.06 VARIOUS CRADLE PAG. 18 PAG. 3 VARIE CULLA ASSEMBLY MANUAL LEGS CAGE V. 2.06 PAG. 5 PAG. 13 ---------------- GAMBE MANUALE GABBIA ASSEMBLAGGIO V. 2.06 HARNESS CONNECTIONS PAG. 9 PAG. 7 SELLETTE...
  • Page 3 ECO 2 LIGHT ASSEMBLY MANUAL ____ VER. 2.06 FOR THE ASSEMBLY AT LEAST TWO PEOPLE ARE NECESSARY ---------------------------- PER IL MONTAGGIO SONO NECESSARIE ALMENO DUE PERSONE Place the rear part on a support about 30 cm high and raise the motor base...
  • Page 4 ECO 2 LIGHT ASSEMBLY MANUAL ____ VER. 2.06 position and lock the bolts on the upper side ------------------------ Posizionare e bloccare i bulloni del lato superiore position and lock the bolts on the lower side ------------------------ Posizionare e bloccare i bulloni del lato inferiore Products ©...
  • Page 5 ECO 2 LIGHT ASSEMBLY MANUAL ____ VER. 2.06 position the leg and screw the bolt, WITHOUT LOCKING for now, beginnings from the front support ------------------------ posizionare la gamba e avvitare il bullone SENZA STRINGERLO per ora, iniziando dal supporto frontale...
  • Page 6 ECO 2 LIGHT ASSEMBLY MANUAL ____ VER. 2.06 Move the third support slightly to center the clutch on the frame ------------------------ Muovere leggermente il terzo supporto per centrare l’innesto sul telaio position and lock the upper bolt and the two other bolts,...
  • Page 7 ECO 2 LIGHT ASSEMBLY MANUAL ____ VER. 2.06 DO NOT TIGHTEN STRONGLY THE BOLDS TO AVOID CRUSHING THE TUBE ----------------------------- NON STRINGERE TROPPO FORTE I DADI PER EVITARE DI SCHIACCIARE IL TUBO The cradle has an internal security cable that must be hooked...
  • Page 8 ECO 2 LIGHT ASSEMBLY MANUAL ____ VER. 2.06 Wrap one end of the safety wire around the frame tube, hook it onto itself and lock the hook. Repeat the operation on the other end. ---------------------------- Avvolgere un estremità del cavo di...
  • Page 9 ECO 2 LIGHT ASSEMBLY MANUAL ____ VER. 2.06 if a manual emergency is fitted, path of the MANUAL fasten the belt on the frame with two emergency belt Velcro strips and two clamps ---------------- ------------------------ Percorso della cinta Dell’emergenza MANUALE...
  • Page 10 ECO 2 LIGHT ASSEMBLY MANUAL ____ VER. 2.06 Products © Copyright s.r.l. Page...
  • Page 11 ECO 2 LIGHT ASSEMBLY MANUAL ____ VER. 2.06 Place the tanks in the appropriate housing ------------------------ Sistemare le taniche nell’apposito alloggiamento Block the tanks with a double turn of the belt on the frame ------------------------ Bloccare le taniche con un...
  • Page 12 ECO 2 LIGHT ASSEMBLY MANUAL ____ VER. 2.06 Products © Copyright s.r.l. Page...
  • Page 13 ECO 2 LIGHT ASSEMBLY MANUAL ____ VER. 2.06 take the pilot ventral belt, circle it on the central frame and close it on the buckle ------------------------ prendere la cinta della chiusura ventrale del pilota, fare un giro attorno al telaio centrale...
  • Page 14 ECO 2 LIGHT ASSEMBLY MANUAL ____ VER. 2.06 Assemble the three support arms of the rear cage, the shorter goes up and the other two go one on the right and one on the left, being careful not to invert them...
  • Page 15 ECO 2 LIGHT ASSEMBLY MANUAL ____ VER. 2.06 Pass the belt in the buckle, tension and go back by locking the velcro on itself ------------------------ Passare la cinta nella fibbia, tensionare e tornare indietro bloccando il velcro su se stesso...
  • Page 16 ECO 2 LIGHT ASSEMBLY MANUAL ____ VER. 2.06 Take the cage already folded on itself ------------------------ Prendere la gabbia già piegata su se stessa Mount the central part first and then let the other two parts hang on the sides...
  • Page 17 ECO 2 LIGHT ASSEMBLY MANUAL ____ VER. 2.06 insert the part on the arm first and then the upper part blocking it with velcroes ------------------------ innestare prima la parte sul braccio e poi la parte superiore bloccandola con i velcri...
  • Page 18 ECO 2 LIGHT ASSEMBLY MANUAL ____ VER. 2.06 Hook the elastic bands down to the prepared connections -------------------- Agganciare gli elastici in basso agli attacchi predisposti If a ballistic emergency parachute is installed, pass the rubber band behind the emergency belt into the appropriate eyelet.
  • Page 19 ECO 2 LIGHT ASSEMBLY MANUAL ____ VER. 2.06 To mount the cockpit, loosen the screws and lift it up to its position ------------------------ Per montare il cockpit, allentare le viti e sollevarlo fino a raggiungere la sua posizione First tighten the screws on both sides and then close the velcroes...
  • Page 20 ECO 2 LIGHT ASSEMBLY MANUAL ____ VER. 2.06 Position the propeller blades in the correct position and direction to facilitate assembly, then proceed to interlock the blades and lock them with the flange already prepared with the bolts inserted ------------------------ Posizionare le pale dell’elica nella...
  • Page 21 ECO 2 LIGHT ASSEMBLY MANUAL ____ VER. 2.06 Assemble the propeller covers starting from the one with the belt on the tip, then placing the blade in a vertical position ------------------------ Montare i coprielica iniziando da quello con la cinghia sulla punta,...
  • Page 22 ECO 2 LIGHT ASSEMBLY MANUAL ____ VER. 2.06 Wing hook setting Assisted wing inflating for TANDEM configuration at takeoff setting ------------------------ ------------------------ Aggancio vela per decollo Settaggio per aiuto In configurazione BIPOSTO GONFIAGGIO VELA al decollo It is never necessary to move the...
  • Page 23 ECO 2 LIGHT ASSEMBLY MANUAL ____ VER. 2.06 NOTE Products © Copyright s.r.l. Page...