Tech Controllers EU-3910 SIGMA User Manual page 13

 Once the module has been connected properly, select Module ON.
 Next, select Registration. The controller will generate a code.
 Log on emodul.pl, go to Settings tab and enter the code which appeared on the controller screen.
 It is possible to assign a name or description to the module as well as provide phone number and e-mail address
to which the notifications will be sent.
 Once generated, the code should be entered within 60 minutes. Otherwise, it will become invalid and it will be
necessary to generate a new one.
 Internet module parameters such as IP address, IP mask, gate address etc. may be set manually or by selecting
DHCP option.
13