Importing Cx-Programmer Symbols Into A User Link Table - Omron SYSMAC CS Series Operation Manual

User Link Tables

3-5-3 Importing CX-Programmer Symbols into a User Link Table

1, 2, 3...
3) Paste the function block on the block diagram.
4) When software connections are made, the ITEMs that are connected to
the field terminal block will be automatically registered in the user link
table.
If CX-Programmer is running on the same computer, information on all of the
symbols in the local symbol table in the current CXP Project can be imported into
a user link table.
Note The CX-Programmer must be version 2.0 or higher.
CX-Programmer
Project PLC
Program 1
Program 2
Program 3
Use the following procedure.
1. Start the CX-Programmer.
2. Select Import CX-Programmer Symbols from the Settings Menu. The fol-
lowing dialog box will be displayed.
3. Click the OK Button. The local symbol table from the CX-Programmer will be
imported to the user link table in the CX-Process Tool as shown below.
• Example: CX-Programmer Symbol Table
Local symbol
table
Local symbol
table
Imported
Local symbol
table
Section 3-5
CX-Process Tool
User link table
151