Commissioning Tcu; Key Assignment - Siemens SINUMERIK 840D sl TCU 30.3 Equipment Manual

IP address ranges reserved for NCU and PCU/IPC
The following defaults apply on delivery:
• Connection to the system network with subnet mask 255.255.255.0:
• Service connection with subnet mask 255.255.255.224:
6.2

Commissioning TCU

6.2.1

Key assignment

Key assignment
Functions of the keys and softkeys in the "Operator panel service system":
Softkey
Page
Page
Char
Char
TCU 30.3
Equipment Manual, 03/2023, A5E40874197B AD
IP address
192.168.214.1
192.168.214.2 – 9
192.168.214.10 – 239
192.168.214.240
192.168.214.241
192.168.214.242 – 249
192.168.214.250 – 254
IP address
192.168.215.1
192.168.215.2 – 23
192.168.215.24 – 30
Key on OP
HSK1
HSK2
HSK3
HSK4
HSK5
HSK6
VSK7
Cancel
Network station
NCU on X120
For additional NCUs with a fixed IP address on
the system network
For additional TCUs, later for additional PCUs,
IPCs, NCUs, MCPs, MPPs
Reserved for EKS (Electronic Key System)
Fixed IP address of PCU/IPC on Eth 2
For additional PCUs/IPCs with a fixed IP address Not assigned
For PGs with a fixed IP address (Service connec‐
tion)
Network station
NCU on X127
For service purposes with PG, PC
Fixed IP address, e.g. for a modem
External key‐ Description
board
<F1> Moves the cursor down a row
<F2> Moves the cursor up a row
<F3> Moves the cursor down a page
<F4> Moves the cursor up a page
<F5> Inserts text or digits
<F6> Inserts text or digits
← Cancel / Return
Networking
6.2 Commissioning TCU
Remark
Default
Not assigned
DHCP clients
Default
Default
Not assigned
Remark
Default
DHCP clients
Not assigned
45