Stop Or Activate All The Music Channels Of The Area; Stop Or Activate A Specific Music Channel; Configure Music Channels - Optimus COMPACT Installation And Operating Instructions Manual

11.5. Stop or activate all the music channels of the area

Using the /  navigation keys, select the settings menu ( ).
1.
Using the / keys select MUSICAL CHANNELS and press OK
2.
Using the / keys select START MUSIC if you want to activate the music channels of the area or STOP MUSIC if you want to
3.
stop the music channels of the area.
4. Press OK.

11.6. Stop or activate a specific music channel

Using the /  navigation keys, select the settings menu ( ).
1.
Using the / keys select MUSICAL CHANNELS and press OK
2.
Using the / keys select CONFIGURE and press OK.
3.
4. With the SOURCE: text line: selected, press OK.
Using the / keys select the music channel you wish to activate or stop and press OK.
5.
Press  and select ON to activate the channel or OFF to stop it.
6.
7. Press OK.
Press , and using the navigation keys / , select APPLY to apply the new settings or CANCEL to discard the changes.
8.
9. Press OK.

11.7. Configure music channels

From the keyboard of the paging desk it is possible to configure the musical sources of the area, assigning zones or groups to the
available musical channels.
Using the /  navigation keys, select the settings menu ( ).
1.
Using the / keys select MUSICAL CHANNELS and press OK
2.
Using the / keys select CONFIGURE and press OK.
3.
4. With the SOURCE: text line: selected, press OK.
Using the / keys select the music channel you wish to configure and press OK.
5.
Press  to select the Z + G: text line and press OK.
6.
A list with the name of the zones and their identifiers is displayed. Press  and a list with the name of the groups and their
7.
identifiers will be displayed. Use the  and  keys to alternate between the zones list and the groups list. Once you
desired list, use the navigation keys / to select each of the zones or groups to which you want to assign the music channel
and press OK. The selected zones and groups are preceded by [
Once you have selected the zones and groups that you want to assign to the music channel, press .
8.
Press  again, and using the navigation keys / , select APPLY to apply the new settings or CANCEL to discard the changes.
9.
10. Press OK.
Repeat this process for each of the music channels you want to configure.
COMPACT version 5.2.002 ENG
COMPACT
4ETH
(Operator or Administrator user level is required)
(Operator or Administrator user level is required)
(Operator or Administrator user level is required)
].
*
R + D Department
Modular audio matrix
with IP connection
see the
22