Optimus COMPACT Installation And Operating Instructions Manual page 14

2) Remove the control module.
Figure 17
Set
3) DIP switch S2.
4) Once configured, reinsert the control module and connect the power supply.
COMPACT version 5.2.002 ENG
COMPACT
4ETH
Modular audio matrix
with IP connection
Figure 18
DIPSWITCH S2.
CONFIGURATION AS AN INTERMEDIATE OR
END ELEMENT OF THE BUS CAN
DIPSWITCH 1 → ON*
* END ELEMENT
DIPSWICTH 2 → ON*
DIPSWITCH 1 → OFF
INTERMEDIATE
DIPSWICTH 2 → OFF
ELEMENT
* FACTORY SETTINGS
R + D Department
14